Cyclades User's Guide - Manual (Page 438)

Configure Menu Overview
422 AlterPath KVM/net Installation, Administration, and User’s Guide
Figure 7-10:Save/Load Config Configuration Screens
The following table shows the screens that appear when the “Save/Load
Configuration” option is selected from the Configure menu in the OSD.
Table 7-25:Save/Load Configuration Screens
Screen Description
Save
Configuration When “Save Configuration” is selected, the following two
screens appear.
Configure
— Save/Load Config.
— Save Configuration
— Saving configuration . . .
— Configuration was . . . saved.
— Load Configuration
— Restoring configuration . . .
— Configuration was loaded . . .
— Save to FTP
— Save to FTP Server—Filename
— Server
— Username
— Password
— Saving configuration . . .
— Configuration was . . . saved
— Load from FTP
— Load from FTP Server—Filename
— Server
— Username
— Password
— Restoring configuration . . .
— Configuration was loaded . . .
— Exit