Cyclades User's Guide - Manual (Page 459)

443
4. When the boot process is completed, the following prompt appears.
5. If the password is forgotten execute the following command.
6. Save the new configuration and reboot the unit.
7. If there are configuration problems execute the following commands to
reset the configuration to factory default.
8. The system reboots and displays the following message.
9. If the problem is due to an upgrade or a downgrade, the process needs to be
repeated to reverse the problem.
a. The network must be initialized in order to reach an FTP server.
[root@(none) /]#
[root@(none) /]# passwd
New password: *******
Re-enter new password: *******
Password changed
[root@(none) /]# saveconf
Checking the configuration file list...
Compressing configuration files into /tmp/
saving_config.tar.gz ... done.
Saving configuration files to flash ... done.
[root@(none) /]# reboot
[root@(none)]# echo 0> /proc/flash/script
[root@(none)]# reboot
[root@(none)]# Restarting system