Cyclades User's Guide - Manual (Page 256)

Configuration
240 AlterPath KVM/net Installation, Administration, and User’s Guide
Firewall Configuration Procedures
The following table has links to the procedures for defining packet filtering:
T To Add a Chain
1. Go to Configuration>Network>Firewall Configuration in Expert Mode.
The IP Filtering form appears.
2. Click “Add.”
The “Add Chain” dialog box appears.
3. Enter the name of the chain to be added in the “Name” field and then click
OK.
Spaces are not allowed in the chain name.
The name of the new chain appears in the list.
4. Finish defining the chain by adding one or more rules, as described in to
“To Add a Rule for IP Filtering” on page 244.
T To Edit a Chain
Perform this procedure if you want to change the policy for a default chain.
To Add a Chain Page 240
To Edit a Chain Page 240
To Edit a Rule for IP Filtering Page 241
To Add a Packet Filtering Rule Page 242