Cyclades User's Guide - Manual (Page 27)

Introduction 11
Activity LEDs on the Back of the KVM/net
The following figure shows the position of the LEDs as they appear on the
back of the KVM/net. The LEDs are designed to monitor the interface
connections as described in Table 1-2, “LED Descriptions,” on page 12.
The diagram below shows a close up view of the LEDs on the back of the
KVM/net. The LEDS monitor the AUX ports, ETHERNET, and CONSOLE
ports as described in Table 1-2.
Figure 1-7: LEDs on the KVM/net Management Ports
3 4
5 6 7 8
1 2