Cyclades User's Guide - Manual (Page 110)

Performing Basic Network Configuration
94 AlterPath KVM/net Installation, Administration, and User’s Guide
6. Enter the IP address for the DNS server and press Enter.
The Domain form appears.
7. Enter the domain name and press Enter.
The Hostname form appears.
8. Enter the hostname for the KVM/net and save the changes to complete the
basic network configuration.
The Configuration menu appears.
• To configure an NTP (network time protocol) server or to enter the date
and time manually, go to “To Set the Time and Date Using the OSD” on
page 96.