Cyclades User's Guide - Manual (Page 202)

Configuration
186 AlterPath KVM/net Installation, Administration, and User’s Guide
T To Specify or Change the Alias for a KVM Port
1. Go to Configuration>KVM>Devices in Expert mode, select the device that
includes the port(s) you wish to modify.
2. Click the “Ports” button.
A list of all the selected ports appears.
3. Select a single port to be modified, and then select the “Modify” button.
The “Modify Port” dialog box appears.
4. To change the port’s alias, do the following steps.
a. Enter a new alias in the “Alias” field.
b. Click OK on the dialog box.
5. Click “Done” on the form listing all the ports.
6. Click “apply changes.”
T To Enable or Disable a KVM Port
1. Go to Configuration>KVM>Devices in Expert mode, and select the device
that contains the port(s) you wish to enable or disable.
2. Click the “Ports” button.
A form listing all the selected ports appears.
3. Select the port(s) to be enabled or disabled, and then select the “Enable” or
“Disable” button.
4. Click “Done” on the form listing all the ports.
5. Click “apply changes.”