Cyclades User's Guide - Manual (Page 233)

Web Manager for Administrators 217
Configuration
Figure 4-27:NIS Server Authentication Form
2. Fill in the form according to your configuration of the NIS server.
3. Click “Done.”
4. Click “apply changes.”
T To Identify a RADIUS Authentication Server
Perform this procedure to identify the authentication server when the KVM/
net or any of its ports is configured to use the RADIUS authentication method
or any of its variations (Local/RADIUS, RADIUS/Local, or RADIUS/
DownLocal).
1. Go to Configuration>Authentication>RADIUS in Expert mode.
The RADIUS form displays as shown in the following figure.