Host settings, To configure host settings [expert – Cyclades User's Guide User Manual
Page 244
Advertising
Configuration
228
AlterPath KVM/net Installation, Administration, and User’s Guide
Host Settings
When Configuration>Network>Host Settings is selected in Expert mode, the
form shown in the following figure appears.
T
To Configure Host Settings [Expert]
The Host Settings form allows you to configure the network settings for the
KVM/net.
1. Go to Expert>Network>Host Settings.
The Host Settings form appears.
2. By default, the DHCP is enabled. To disable DHCP, clear the DHCP check
box.
The system adds the Ethernet Port and DNS Service sections.
Advertising