Cyclades User's Guide - Manual (Page 453)

437
How to Upgrade the Firmware on KVM/net
1. Download the firmware bin file (*.bin) and the md5 checksum (*.md5)
from Cyclades download site at http://www.cyclades.com/support/
downloads.php or from Cyclades FTP server at ftp://ftp.cyclades.com and
place it on your local FTP or SSH/SCP server.
2. Use FTP or SSH/SCP to copy the downloaded files to the flash memory of
your KVM/net unit by overwriting the existing firmware.
T FTP Method
Follow the below procedure if you use FTP. In the following example the
assumption is that your local FTP server is 192.168.51.242, and the firmware
is saved at /pub/cyclades/zImage_kvm_200.bin
1. Connect a terminal to the console port of your KVM/net, login as “root”,
and execute the following commands.
T SSH/SCP Method
Follow the below procedure if you use SSH/SCP. In the following case the
assumption is that your local SSH/SCP server is 192.168.51.242, your
username is paul and the firmware is saved at /home/paul/cyclades/
zImage_kvm_200.bin.
[root@KVM/net flash]# ftp 192.168.51.242
hash
bin
lcd /proc/flash
cd /pub/cyclades
get zImage_kvm_200.bin
get zImage_kvm_200.md5
quit