To add a packet filtering rule – Cyclades User's Guide User Manual
Page 258
Configuration
242
AlterPath KVM/net Installation, Administration, and User’s Guide
2. Select a chain whose rule you want to edit.
3. Click the Edit Rule button.
The Edit Rules form appears. Each line represents a rule for the selected
chain.
4. Select the Chain you wish to edit from the Chain list, and click the Edit
Rule button.
The Edit Rules form appears.
5. Specify the rule as desired.
See “IP Filtering” on page 233 for a definition of the input fields, if
needed.
6. Click on the “apply changes” button to complete the procedure.
T
To Add a Packet Filtering Rule
1. Go to Configuration>Network>Firewall Configuration in Expert Mode.
2. Select the chain whose rule you want to edit from Chain list, and then and
then click the “Edit Rules” button.
3. Click the “Edit Rule” button.
The “Edit Rule for Chain” dialog box appears.
4. Specify the rule as desired.
5. Click the “Add” button.
The “Add Rule” dialog box appears.
6. Complete the Add Rule dialog box.
7. Click “apply changes.”
You can perform the following task from the IP Filtering Form:
•
“To Add a Chain for IP Filtering” on page 243
•
“To Edit A Chain for IP Filtering” on page 244
•
“To Add a Rule for IP Filtering” on page 244
•