To configure network parameters using the osd – Cyclades User's Guide User Manual
Page 108
Performing Basic Network Configuration
92
AlterPath KVM/net Installation, Administration, and User’s Guide
4. Re-enter the new password.
The password confirmation dialog box appears.
5. Press Enter.
The Local Users menu appears.
6. Select Exit or press the Esc key to exit the Local Users menu.
You can use the Exit or Cancel option or the Esc key to exit any window
on the OSD.
7. If you are performing an initial configuration of basic networking
parameters, see “To Configure Network Parameters Using the OSD” on
page 92.
8. Otherwise, go to the appropriate menu option for your next task.
T
To Configure Network Parameters Using the OSD
1. From the OSD Main Menu, go to Configure > Network.
The DHCP form appears.
2. Select the “disabled” option and press Enter.
The IP address form appears.