Cyclades User's Guide - Manual (Page 270)

Configuration
254 AlterPath KVM/net Installation, Administration, and User’s Guide
SNMP traps, a version of the Unix 'netstat' command using SNMP, and a Tk/
Perl mib browser.
SNMP is configured with community names, OID and user names. The
KVM/net supports SNMP v1, v2, and v3. The two versions require different
configurations. SNMP v1/v2 requires community, source, object ID and the
type of community (read-write, read-only). V3 requires user name.
Important: Check the SNMP configuration before gathering information about KVM/net
by SNMP. An unauthorized user can implement different types of attacks to
retrieve sensitive information contained in the MIB. By default, the SNMP
configuration in KVM/net cannot permit the public community to read SNMP
information.
T To Configure SNMP
1. In Expert Mode go to: Configuration>Networks>SNMP.
The SNMP form appears.