Cyclades User's Guide - Manual (Page 78)

KVM Expander
62 AlterPath KVM/net Installation, Administration, and User’s Guide
Ports on the KVM Expander
The KVM Expander has two CAT5 access ports and either 8 or 16 KVM
ports.
Figure 1-12: Ports on the KVM Expander Back Panel
Table 1-24: KVM Expander Port Types
Port Type Use and Connection Information
User A and
User B The access ports can be connected with an RJ-45 cable to KVM ports
on the primary KVM unit. Once the KVM Expander is configured as a
cascaded device on the master KVM unit, users can connect to one or
both ports. Each port allows one connection to a server plugged into the
KVM Expander, so a maximum of two server connections can be made
at one time.
See “Installing the AlterPath KVM Expander” on page 119.
KVM ports KVM ports on the KVM Expander work exactly as the KVM ports on
the KVM/net: They allow the connection of a CAT 5 cable to a
Terminator, which is connected to a server.
See “KVM Ports” on page 7 for more background information on KVM
ports.
See “Connecting Servers to the KVM Ports” on page 78 for information
on connecting servers to the KVM ports.
KVM ports User A port
User B port