Cyclades User's Guide - Manual (Page 215)

Web Manager for Administrators 199
Configuration
8. Click OK.
9. Click “apply changes.”
Configuring Inband (RDP) Servers
Selecting Configuration>Inband in Expert mode brings up the form displayed
in the following figure.
Figure 4-21:Inband Configuration Form
You can use the Add, Edit, and Delete buttons to configure inband server
connections to Windows Terminal Servers using RDP. Up to 16 or 32 inband
servers can be configured on a KVM/net depending on the model ordered.
If secondary KVM/net units are cascaded to the master KVM/net,
administrators can configure additional inband servers. The total number of
inband servers configured is the same as the total number of KVM ports in the