Cyclades User's Guide - Manual (Page 342)

Connecting to Servers Locally Through the OSD
326 AlterPath KVM/net Installation, Administration, and User’s Guide
on connecting to the User 1 port, or see “To Connect the KVM RP to the
KVM/net” on page 131 for instructions on connecting to the User 2 port.
Connections made through the OSD are to physically connected devices only.
Use the Web Manager to connect to a remote device. See “To Connect to
Servers Through The Web Manager’s “Connect To Server” Form” on page
322 for instructions.
Note: The OSD cannot be used to access in-band servers. See “Connecting to
Servers Remotely Through the Web Manager” on page 321 for information
and instructions on accessing in-band servers.
T To Connect to Servers Through the OSD
Connection Menu
1. On the OSD Login window, enter your username and password as
provided to you by the KVM/net administrator.
The OSD Main Menu appears.
2. From the OSD Main Menu, select Connect.
The Connection Menu appears.
3. To select the port you wish to connect to, do one of the following
procedures: