Cyclades User's Guide - Manual (Page 377)

On Screen Display 361
Configure Menu Overview
Understanding OSD Configuration Screen Series
Selecting an option from the “Configure” menu usually brings you through a
series of related screens, which you navigate through one at a time until you
reach the final screen.
For example, if you select Date/Time, you are presented with a series of
“Date/time Config.” screens starting with “NTP” and ending with “Time,” as
shown in the following figure.
Figure 7-2:OSD Configuration Series Screens
As illustrated, all the configuration screens except the final screen have a right
arrow at the bottom right that you can select to go to the next screen. Clicking
“Save” on any one of the screens saves the changes made to that point. You
can wait until you get to the final screen in a series before saving changes.
Clicking “Save” on the final screen saves any change you have made and
takes you back to the Configuration menu.
See “Navigating the OSD” on page 352, if needed, for instructions on how to
use the Tab key and other keys to move around the screens in the OSD.
Next button
First screen Final screen
Final Save button