Cyclades User's Guide - Manual (Page 281)

Web Manager for Administrators 265
Configuration
• To add a static route, select the Add button from the form.
The New/Modify Route dialog box appears.
3. Complete the dialog box as follows:
Table 4-12: Add/Modify Static Routes Fields
Field Name Definition
Route Select Default, Network, or Host.
Network IP The address of the destination network.
This field appears only if Network is
selected.
Network Mask The mask of the destination network.
This field appears only if Network is
selected.
Host IP The IP address of the destination host.
This field appears only if Host is selected.
Go to Select Gateway or Interface.