Cyclades User's Guide - Manual (Page 151)

Web Manager for Administrators 135
Common Tasks
Configure power management for the
AUX port (if the port is connected to an
optional AlterPath PM) • “To Configure the AUX Port for Use With an
IPDU or an External Modem” on page 267
• “To Configure a KVM Port for Power
Management” on page 183
Manage power on an optional AlterPath
PM) • “To View Status, Lock, Unlock, Rename, or
Cycle Power Outlets” on page 163
• “To View and Reset IPDU Information” on
page 165
• “To Configure Users to Manage Specific
Power Outlets” on page 166
• “To Specify or Change the Alias of an IPDU”
on page 168
• “To Configure Creation of Alarms and
Syslog Files for IPDUs” on page 168
• “To Upgrade Firmware on an AlterPath PM”
on page 169
Choose among authentication methods
and specify authentication servers for
logins to the KVM/net and for logins to
devices connected to the KVM/net’s
ports • “To Configure an Authentication Method for
KVM/net Logins” on page 206
• “See “Configuring Authentication Servers
for Logins to the KVM/net and Connected
Devices” on page 208.” on page 207
Specify encryption levels for KVM ports “Network” on page 226
Configure rules for the KVM/net to filter
packets like a firewall • “To Add a Chain for IP Filtering” on page
243
• “To Edit A Chain for IP Filtering” on page
244
• “To Add a Rule for IP Filtering” on page 244
• “To Edit a Rule for IP Filtering” on page 241
Task Where Documented/Notes