Controlling kvm port connections – Cyclades User's Guide User Manual
Page 344
Controlling KVM Port Connections
328
AlterPath KVM/net Installation, Administration, and User’s Guide
Controlling KVM Port Connections
Once connected to a server, you may want do one or more of the procedures
listed in the following table.
Table 6-3: Tasks Available While Connected to KVM Ports
Task
Where Documented
Return to the OSD Connection menu after
connecting to a port.
“To Return to the Connection Menu After
Connecting to a Port” on page 331.
Access a port that is already in use by
another user.
“Sharing KVM Port Connections” on page
336
Make direct connections to other servers
without returning to the OSD Connection
Menu.
• “To Initiate Cycle by Server” on page 332
• “To Connect to the Next Authorized
Server from the Current Server” on page
333
• “To Connect to the Previous Authorized
Server from the Current Server” on page
333
Reset your keyboard and mouse.
“To Reset the Keyboard and Mouse” on
page 334
Adjust the color and brightness of the server
window.
“To Adjust Screen Brightness and Cable
Length” on page 333
Power on, power off, or reboot the
connected server.
“To Power On, Power Off, or Reboot the
Connected Server” on page 335
View information about the currently
selected port.