Reboot, To reboot the kvm/net from a remote location – Cyclades User's Guide User Manual
Page 314
Advertising
Management
298
AlterPath KVM/net Installation, Administration, and User’s Guide
Reboot
Selecting Management>Reboot in Expert mode, brings up the following form.
Figure 4-52:Reboot Form
Selecting the Reboot button allows you to reboot the system without
physically turning off the hardware.
T
To Reboot the KVM/net From a Remote
Location
1. In Expert mode, go to: Management>Reboot
2. Click the Reboot button.
3. A confirmation page appears.
4. Click OK to reboot the system.
Advertising