Cyclades User's Guide - Manual (Page 404)

Configure Menu Overview
388 AlterPath KVM/net Installation, Administration, and User’s Guide
Host or Net Route Types of routes: “host,” “net,” or “default.” Note: A default
route is used to direct packets that are addressed to networks not
listed in the routing table.
Target IP address for the target host or network.
Netmask Appears only when “net” is selected from the “Host or Net
Route” screen. Netmask for the destination.
Gateway or Device Two options are: “Gateway (gw)” or “Network Device (dev).”
Gateway Appears only when “Gateway (gw)” is selected from the
“Gateway or Device” menu. Gateway IP address.
Device Appears only when “Network Device” is selected from the
“Gateway or Device” menu. Device address (such as eth0).
Table 7-11:Static Routes Screens [OSD] (Continued)
Screen Description