Cyclades User's Guide - Manual (Page 199)

Web Manager for Administrators 183
Configuration
Configuring Individual KVM Ports
On the Modify Port dialog box, you can do the following:
• Configure an alias for a single KVM port
• Assign a Lockout Macro to the KVM connected server
• Configure power management for the server that is connected to the KVM
port while the user is logged in to the server
• Enable or disable KVM ports
The following table lists the related procedures with links to where they are
described.
T To Configure a KVM Port for Power Management
Power outlets are configured per KVM port. If you have a cascade
configuration, note the following:
• The KVM port on the master KVM/net can only be assigned outlets from
the IPDUs connected to the master. You can not assign outlets from an
To Configure a KVM Port for Power Management Page 183
To Specify or Change the Alias for a KVM Port Page 186
To Enable or Disable a KVM Port Page 186