Cyclades User's Guide - Manual (Page 321)

Web Manager for Regular Users 305
IPDU Power Management
See “Controlling Power of a KVM-connected Server” on page 335.
Power Control of Any Device Plugged Into an
AlterPath PM on the KVM/net
Depending on your access rights, the KVM/net allows you to view and
manage all PMs connected to the KVM/net. Regular users can go to the IPDU
Power Management menu on the Web Manager and use the Outlets Manager
and the View IPDUs Info forms to manage and view the status of PMs and the
devices plugged into them.
The following table lists the power management tasks available to regular
users through the Web Manager and links to the associated procedures.
Table 5-1: Power Management Tasks Available to Regular Users
Task Where Documented
Switch on/off and lock/unlock outlets; reboot
the network devices, and create an alias for an
outlet. • “Outlets Manager” on page 162
• “To View Status, Lock, Unlock, Rename,
or Cycle Power Outlets” on page 163
View IPDU information by ports on a master
and a slave PM unit. • “View IPDUs Info” on page 164
• “To View Status, Lock, Unlock, Rename,
or Cycle Power Outlets” on page 163
Switch on/off and lock/unlock outlets; reboot
servers connected to KVM ports. “To Power On, Power Off, or Reboot the
Connected Server” on page 335