Cyclades User's Guide - Manual (Page 285)

Web Manager for Administrators 269
Configuration
With the System form administrators can set the time and date on the KVM/
net and reboot the KVM/net if necessary. The following procedures are
available on the System form:
• “Creating a Custom Timezone Selection” on page 272
• “To Set The Time and Date With NTP” on page 270
• “Boot Configuration” on page 273
• “To Configure KVM/net Boot” on page 276
Time/Date
Selecting Configuration > System > Time/Date in Expert mode brings up the
form shown in the following figure.
You can use the Time/Date form in Expert mode to set the KVM/net’s time
and date in one of the following two methods.
• Configuring manually by entering the time and date in the form
• Configuring using the NTP server
Enabling Network Time Protocol (NTP) synchronizes the KVM/net’s
system clock with an NTP server, which maintains the true time (the
average of many high-accuracy clocks around the world).
• Setting up a customized timezone configuration