Cyclades User's Guide - Manual (Page 393)

On Screen Display 377
Configure Menu Overview
IP Filtering Configuration Screens
You can select the IP Filtering option from the Network Configuration menu
to configure the KVM/net to filter packets like a firewall.
Selecting IP Filtering under Configuration>Network brings up the “Filter
Table.” The “Filter Table” lists the default chains along with any
administratively configured chains, the “Add Chain,” and the “Exit” options,
as shown in the following screen.
You can use this menu to create chains and set up rules for the new chains or
you can edit or delete a previously configured chain. The following diagram
lists the names of the configuration screens accessed under Configure>
Network>IP Filtering.