Cyclades User's Guide - Manual (Page 180)

Access
164 AlterPath KVM/net Installation, Administration, and User’s Guide
4. To momentarily power an outlet off and then on again, click the adjacent
“Cycle” button.
5. To change the outlet’s name or the power up interval, click the adjacent
“Edit” button.
The Edit Outlet dialog box appears.
a. To change the name assigned to the outlet, enter a new name in the
“Outlet Name” field.
b. To change the time between when this outlet is turned on and another
can be turned on, change the default 0.50 number of seconds in the
“Power Up Interval” field.
6. Click OK.
7. Click “apply changes.”
View IPDUs Info
On the “View IPDUs Info” form under Access>IPDUPower Management in
Expert mode, you can view the following information about any connected
IPDUs:
• Number of outlets on each unit
• Current
• Temperature