Cyclades User's Guide - Manual (Page 265)

Web Manager for Administrators 249
Configuration
• If you selected Reject from the Target field, the following field appears:
“Reject with” means that the filter drops the input packet and sends back a
reply packet according to any of the reject types listed below.
Using tcp flags and appropriate reject type, the packets are matched with
the REJECT target. The following options are available:
• icmp-net-unreachable – ICMP network unreachable alias
• icmp-host-unreachable – ICMP host unreachable alias
• icmp-port-unreachable – ICMP port unreachable alias
• icmp-proto-unreachable – ICMP protocol unreachable alias
• icmp-net-prohibited – ICMP network prohibited alias
• icmp-host-prohibited – ICMP host prohibited alias
• echo-reply – Echo reply alias
• tcp-reset – TCP RST packet alias
6. Click on the OK button when done.
7. Click on “apply changes.”
Log Prefix The prefix that will identify the log.
TCP Sequence Check box to include TCP sequence in the
log.
TCP Options Check box to include TCP options in the log.
IP Options Check box to include IP options in the log.
Field Name Definition