Cyclades User's Guide - Manual (Page 212)

Configuration
196 AlterPath KVM/net Installation, Administration, and User’s Guide
3. To set KVM port access permissions for a group, select the name of the
group from the Group List.
4. Click the “Set KVM Permissions” button.
The “KVM Access list for “username” or “groupname” dialog box appears.
Note: When the “Default Access List” check box is checked, the user or group has
the same permissions that are assigned to the Generic User. Changes made on
this form when a username is selected convert the user into a non-generic user.
5. Go to “To Assign KVM Port Access to a User or Group” on page 196.
T To Assign KVM Port Access to a User or Group
Perform this procedure when you want to specify the types of access a user or
group of users can have to computers that are connected to the KVM/net’s
KVM ports.
1. Go to Expert>Configuration>Users & Groups, and select a user or group.
If needed see “To Select Users and Groups for Assigning KVM Port
Access” on page 195.
2. To assign to the selected user or group the same permissions assigned to
the Generic User, make sure the “Default Access List” check box is
checked and click OK.
3. To re-define the KVM permissions for the selected user or group, clear the
check box.