Cyclades User's Guide - Manual (Page 406)

Configure Menu Overview
390 AlterPath KVM/net Installation, Administration, and User’s Guide
If NTP is enabled, the following screen appears for entering the IP address of
the NTP server.
If NTP is disabled, the following series of two screens appears to allow you to
enter the date and time manually.
User Station Screens
You can select the User Station option from the OSD Configuration menu to
redefine the parameters that apply to a local user session (when a user is
accessing the OSD through the User 1 or User 2 port).
Configure
— Date/time
— NTP
— enabled
— NTP server
— disabled
— Date/time conf.
— Date
— Time