Cyclades User's Guide - Manual (Page 425)

On Screen Display 409
Configure Menu Overview
Access list for
username - select the
server The access list includes the “Reset all,” “Default,” “Multiple
servers,” and “Exit” options along with each individual KVM
ports.
The “Default” option defines access permissions for all KVM
ports, which apply unless the user has specific access
permissions for any KVM ports.
For a new user, because “Default Access,” is not defined, and
also because no permissions are specified for that user’s access
to any specific port, the Generic Users’ permissions apply.
A series of three checkboxes appear to the right of each entry
that has specific permissions (as defined in the following row).
If a3 port has “No Access” defined, the checkboxes are empty.
The headings for the checkboxes are: rwp for read, write, and
power, and the boxes are checked appropriately when any of
these permissions are defined. For example, in the screen to the
left, the r and w boxes are checked next to “Port_1” and
“Port_2,” which indicates that the user has read-write access to
these ports.
If “Reset all” is selected, the following confirmation screen
appears.
Table 7-18:User Access List KVM Port Permissions Configuration Screens
Screen Description