ATEIS IDA8C - Manual (Page 130)

Ateis Studio 130
© 2012 ATEÏS
3. Connect to the IDA8C/S
4. Click the button [Remote Plug-In]
5. A window [Remote Plug-In] pop up. Select RS485 port number and Remote Type, and key in a series
number (which is different with another DNM). Click the “Plug-In” button in the window. After plug in,
click the “refresh” button to read back the DNM information from the RS485 port If the information is
same with your plug-in, the plug-in is successful.