ATEIS IDA8C - Manual (Page 269)

System Functionality 269
© 2012 ATEÏS
ID
The internal identification for each remote devices.
Remote Type
To specify which type of remote device belong to the ID.
SN
Input serial number for the remote device.
Version
The version of remote device.
RS485 Channel
On left bottom a combo box is used to switch rs485 channel for settings.
Option of Only PSS AS
To specify the channel is connected with PSS AS. When you enable this option, it means no
other remote devices are allowed connected to this channel.
Refresh
Read data from audio processor to refresh display information.
Plug-In
Set the editing data to audio processor.
4. Select Remote Type
Select which type of remote device you'll using in the RS485 channel.
5. Input SN
Type serial number of the remote device.
6. Press Plug-In Button
Write settings to audio processor to register remote devices.