ATEIS IDA8C - Manual (Page 47)

Product Features 47
© 2012 ATEÏS
Device Connection Max. Num Function
DNM PDC 1/PDC Auto noise gain for audio signals.
PPM-IT5 Ethernet
1 Active
Over Eth
Paging, Element Control, Master/Sub Preset Control.
URC200
TPC
Ethernet Eth. Limit Parameters Control, Master/Sub Preset Control.
CD8 PDC 31/PDC
Wall mounted cabinet remote paging console with 8 buttons/
zones.
CD16 PDC 31/PDC
Wall mounted cabinet remote paging console with 16 buttons/
zones.
CD Touch PDC 1/PDC
Wall mounted cabinet remote paging console with touch screen
and Fireman Microphone.
PCP PDC 31/PDC
Wall mounted cabinet remote paging console with telephone
styled microphone.
CDPA PDC 31/PDC
Wall mounted cabinet remote paging console with 24 buttons/
zones and 2 extra selectable microphone sources.
PSC PDC 31/PDC
A grouped console is comprised of a pad with monitoring
speaker, a pad with a gooseneck and 8 buttons/zones, two pads
with 8 buttons/zones.
Deskpad PDC 1/PDC
A remote dialer for making telephone calls via IDA8's telephone
hardware.
Deskpad
Box
PDC 1/PDC
It's a RF transceiver to communication between Deskpad and
IDA8, use it, Deskpad can working without physcial connection.
4.1.2.6 3rd Party Control
The following table list 3rd Party Control protocols IDA8C Supported.
Protocol
Interface
Function
Connection Settings
Ateis 3rd
Party
Protocol
Ethernet(UDP)
UDP Port =
19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Modbus PDC(RS485) PDC Port 1~ 2
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control