ATEIS IDA8C - Manual (Page 32)

Ateis Studio 32
© 2012 ATEÏS
G.Fault LED
This LED lights on when a global fault is detected.
Note: Fault LED and system fault LED are exclusive, if system fault and global fault are detected at
the same time, system only light the system fault LED.
System Fault LED
This LED lights on when a system fault fault is detected.
Global EVAC LED
To indicate system is in EVAC paging or not. This LED lights on if any IDA8 device over Ateis Net
do an EVAC paging.
Bypass Monitoring LED
Show the monitoring function is enabled or not. This LED lights on if monitoring of IDA8 is disabled
by user.
Touch Screen
3.5" Color touch panel offer a graphical interface for user to control or read the status of system.
There is a multi layered menu on it to get/set parameters or change settings of device.
ESC Button
To Navigate menu of touch screen.
OK Button
To Navigate menu of touch screen.
Up Button
To Navigate menu of touch screen.
Down Button
To Navigate menu of touch screen.
Plus Button
To Navigate menu of touch screen.
Down Button
To Navigate menu of touch screen.
Zone EVAC LEDs
To show the audio channel is in EVAC paging or not. Each LED is correspond to a output channel of
Network Paging component, for example, 1st LED is for pin M1, 2nd LED for pin M2 and so on.