ATEIS IDA8C User Manual
Page 21
Advertising
Quick Start
21
© 2012 ATEÏS
9. Check compatibility between device and Ateis Studio. Click [Read Version] of menu.
A window [Version] opened, press button [Read], And then information about version is display in
the grid:
If all firmware unit are compatible with Ateis Studio, go to step 11, otherwise step 10. The below
figure is an example of incompatible version of firmware unit See the red rectangle.
10.Update firmware
Close the window of [Version], go back to [Device Management] window, click link [Update]:
Advertising
This manual is related to the following products: