ATEIS IDA8C - Manual (Page 248)

Ateis Studio 248
© 2012 ATEÏS
Remove
To remove selected master preset.
Master Preset Switching
There is always only one master preset active at the same time. When you're designing a system,
change master to the preset you want to edit. At run time, change master preset to make Ateis
device working on different DSP design belong to the master preset.
Click combo box Master Preset to switch master preset:
5.2.3 Sub-Presets
The sub-Preset function allows storing values of different component elements (volume gain, frequency,
mute, etc) in one Sub-Preset. By loading a Sub-Preset, all the elements associated will take the
predefined values. The Sub-Presets are different in each Master-Presets and of course in each System
(Device).
The idea is to create a Sub-Preset, define which element of which component you want to associate
with the Sub-Preset, then to set this element to their target values, and then to memorize that in the
Sup-Preset.
Sub-Preset Management
On the main window top, click on the ellipsis button next to [Master Preset] combo box.
The Presets window opens. Select the "Sub-Presets" tab.