ATEIS IDA8C - Manual (Page 256)

Ateis Studio 256
© 2012 ATEÏS
On the right side of window, there is a knob to simulate source that triggers event. If you adjust the
knob, the value of elements also changed.
Control Type
This option determines the type of knob simulation, there are two options of Control Type:
o Value
Knob adjust value of elements using native value.
o Percent
Knob adjust value of elements by percentage.
Element
Indicate which element of the component controlled by value trigger.
Component
Indicate which component of the device contains element prior mentioned.
Device
Indicate which device contains component prior mentioned.
System
Indicate which system contains device prior mentioned.
Min
Specify the minimum value of simulating knob.
Max
Specify the maximum value of simulating knob.
Remove
Remove the element controlled by the event.
This operation only remove the relation between element and event, not delete element.
Clear
Remove all elements controlled by the event.