ATEIS IDA8C - Manual (Page 67)

Product Features 67
© 2012 ATEÏS
Amplifier B3 serves Zone 13 ~ zone24.
Software settings for backup amplifier
It is necessary to have software settings to make backup amplifier working.
Numbers in figure show steps to open backup amplifier settings window:
1. Right click mouse on IDA8C1 block in devices window, then click item [Monitor] to open window
"Monitor(Matrix Mode) - IDA8C1".
2. Select tab [Backup Amplifier Monitor].
3. Click button [Amplifier Amount]
Below figure show the software setup window for the backup configuration in Advance Backup
Amplifier Setup :