ATEIS IDA8C - Manual (Page 33)

Product Features 33
© 2012 ATEÏS
Zone Fault LEDs
To show fault status of zone. This LED light on if one of following faults is detected:
Normal AMP Error
Line A Error
Line B Error
Backup AMP Error
AMP Line Leakage Error
EVAC Reset Button
Cancel the event triggered by EVAC button.
Power LED
This LED lights on when IDA8C is power on.
Network LED
Show the status of Ateis Net. This LED lights on if more than two deployed IDA8 devices in Ateis
Net.
EVAC Button
To trigger event bind with this button.
4.1.1.3 Rear Panel
Speaker Zone Outputs
There are 8 zones for speaker & amplifier connection. each zone consists of following connectors
(from left to right):
connector of line A speaker
connector of line B speaker