ATEIS IDA8C - Manual (Page 424)

Ateis Studio 424
© 2012 ATEÏS
Evac
Enable this option to set the paging source is an evacuation source. If an evacuation source is
active on paging, A evacuation paging situation is recognized by IDA8 system, and device
shows this state on front panel LED GLOBAL EVAC. Also this activity will be logged.
Modbus Type
Set the type information of paging source for 3rd party controller which use modbus protocol to
get date from Ateis devices.
Note:
This setting is only a label, not affect behavior of Paging Component.
Modbus Channel
Set the channel information of paging source for 3rd party controller which use modbus protocol
to get date from Ateis devices.
Note:
This setting is only a label, not affect behavior of Paging Component.
Activation
Click the button on grid to open window for detail settings: