ATEIS IDA8C - Manual (Page 231)

System Functionality 231
© 2012 ATEÏS
Signal Path Temporary
In this mode, by selecting a signal link, the signal link and the entire signal path linked will be
highlighted in red. If you click in a free zone, the signal path is cancelled.
In this example the input C1 is routed in the matrix to the output 1 and 2. If you place select the
link of the channel 1, then the signal path on the output 1 and 2 will be displayed in red.
Signal Path Path Fixed
In this mode, by selecting a signal link, the signal link and the entire signal path linked will be
highlighted in red. The signal path is fixed, to cancel it you have to click on another link or
component (not on a free zone).
In this example the input C1 is routed in the matrix to the output 1 and 2. If you place select the
link of the channel 1, then the signal path on the output 1 and 2 will be displayed in red.
Signal Path Lock
In this mode, by selecting a signal link, the signal link and the entire signal path linked will be
highlighted in red, then the mouse cursor will change into , asking you to select the link
again, in order to lock it. The signal path is locked, to cancel it you have to select the mode
"Signal Path Disable ".
In this example the input C1 is routed in the matrix to the output 1 and 2. If you place select the
link of the channel 1, then the signal path on the output 1 and 2 will be displayed in red.