ATEIS IDA8C - Manual (Page 69)

Product Features 69
© 2012 ATEÏS
When a fault is generated, the following things will be done by IDA8/S:
System Fault LED is light on if the fault is a system fault, Fault. G.Fault LED is light on if the fault
is a global fault.
Fault State Output contact open.
Log the fault
A warning message for the fault will show in Touch Screen.
When Ateis Studio is connect to IDA8C/S, in [Device Status] field of [Device Management] panel
will show fault. Below is an example:
There is a warning tone will be generate by monitoring speaker.
A text message is showed in PSS touch screen, below figure is an example.
4.1.6.1 Table of System Faults
Name Description
Flash Error Nand flash inside IDA8C/S is error.
I2C Error
This is an internal error of I2C communication between micro
controllers
Net Card Error
This is error about bad communication between main cpu in IDA8C/
S and net card.
DSP Error
It's an internal error of communication between micro controllers
inside devices.
Preset Table Error
The structure of configuration is not compatible with current
firmware.
No Preset Table There is no configuration inside device.
SPI Flash Error An internal error of micro controller SPI communication.
Para. Table Error
Data error of table which store some important information of
configuration.