H3C Technologies H3C S3100 Series Switches - Manual (Page 217)

1-14
# Configure MAC address replication on Ethernet 1/0/1 to copy the MAC address entries of VLAN 3 to
the MAC address table of VLAN 4.
[SwitchA-Ethernet1/0/1] mac-address-mapping 0 source-vlan 3 destination-vlan 4
[SwitchA-Ethernet1/0/1] quit
# Configure VLAN marking on Ethernet 1/0/2 to replace the VLAN tag of packets that matches ACL
3001 with VLAN tag 3.
[SwitchA] interface Ethernet 1/0/2
[SwitchA-Ethernet1/0/2] traffic-remark-vlanid inbound 3001 remark-vlan 3
# Configure MAC address replication on Ethernet 1/0/2 to copy the MAC address entries of VLAN 4 to
the MAC address table of VLAN 3.
[SwitchA-Ethernet1/0/1] mac-address-mapping 0 source-vlan 4 destination-vlan 3