H3C Technologies H3C S3100 Series Switches - Manual (Page 656)

2-21
Member 2 succeeded in the usm-user configuration.
Member 1 succeeded in the usm-user configuration.
Finish to synchronize the command.
# After the above configuration, you can see that the public SNMP configurations for the cluster are
saved to the management device and member devices by viewing the configuration files.
z Configuration file content on the management device (only the SNMP-related information is
displayed)
[test_0.Sysname-cluster] display current-configuration
#
cluster
cluster-snmp-agent community read read_a
cluster-snmp-agent community write write_a
cluster-snmp-agent group v3 group_a
cluster-snmp-agent mib-view included mib_a org
cluster-snmp-agent usm-user v3 user_a group_a
#
snmp-agent
snmp-agent local-engineid 800007DB000FE22405626877
snmp-agent community read read_a@cm0
snmp-agent community write write_a@cm0
snmp-agent sys-info version all
snmp-agent group v3 group_a
snmp-agent mib-view included mib_a org
snmp-agent usm-user v3 user_a group_a
undo snmp-agent trap enable standard
z Configuration file content on a member device (only the SNMP-related information is displayed)
<test_2.Sysname> display current-configuration
#
snmp-agent
snmp-agent local-engineid 800007DB000FE224055F6877
snmp-agent community read read_a@cm2
snmp-agent community write write_a@cm2
snmp-agent sys-info version all
snmp-agent group v3 group_a
snmp-agent mib-view included mib_a org
snmp-agent usm-user v3 user_a group_a
Local user configuration synchronization
With this function, you can create a public local user for the cluster on the management device, and the
username and password will be synchronized to the member devices of the cluster, which is equal to
creating this local user on all member devices.
The configured local user is a Telnet user, and you can use the public username and password to
manage all member devices through Web.
1) Configuration prerequisites
z NDP and NTDP have been enabled on the management device and member devices, and NDP-
and NTDP-related parameters have been configured.