H3C Technologies H3C S3100 Series Switches - Manual (Page 879)

1-11
To do… Use the command… Remarks
Configure the type of HTTP
operation
http-operation { get | post }
Optional
By default, the type of HTTP
operation is get, that is, the HTTP
operation will get data from the HTTP
server.
Configure the HTTP operation
string and HTTP version
http-string string version
Optional
By default, no HTTP operation string
and HTTP version are configured.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in any
view.
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group and
enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type
test-type jitter [ codec
codec-value ] Required
By default, the test type is ICMP.
Configure the destination IP
address
destination-ip ip-address
Required
The destination address must be
the IP address of a UDP listening
service on the HWPing server.
By default, no destination address
is configured.
Configure the destination port
destination-port
Port-number
Required
The destination port must be the
port of a UDP listening service on
the HWPing server.
By default, no destination port is
configured.
Configure the source IP address source-ip ip-address
Optional
By default, no source IP address is
configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the number of probes
per test
count times
Optional
By default, each test makes one
probe.
Configure the packet size datasize size
Optional
By default, the packet size is 68
bytes.