H3C Technologies H3C S3100 Series Switches - Manual (Page 38)

2-6
Operation Command Description
Configure not to authenticate users authentication-mode none
Required
By default, users logging in through the
Console port (AUX user interface) are
not authenticated.
Set the baud rate speed speed-value
Optional
The default baud rate of a Console port
is 9,600 bps.
Set the check mode parity { even | none | odd }
Optional
By default, the check mode of a
Console port is none, that is, no check
is performed.
Set the stop bits stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a Console port is 1.
Configure
the Console
port
Set the data bits databits { 7 | 8 }
Optional
The default data bits of a Console port
is 8.
Configure the command level
available to users logging into the
user interface
user privilege level level
Optional
By default, commands of level 3 are
available to users logging into the AUX
user interface, and commands of level
0 are available to users logging into the
VTY user interface.
Enable terminal services shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of lines
the screen can contain
screen-length screen-length
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set the history command buffer size
history-command max-size
value
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands by
default.
Set the timeout time for the user
interface idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation is
performed in the user interface within
10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.