H3C Technologies H3C S3100 Series Switches User Manual
Page 732
1-19
Configuring whether first-time authentication is supported
When the device connects to the SSH server as an SSH client, you can configure whether the device
supports first-time authentication.
z
With first-time authentication enabled, an SSH client that is not configured with the server host
public key can continue accessing the server when it accesses the server for the first time, and it
will save the host public key on the client for use in subsequent authentications.
z
With first-time authentication disabled, an SSH client that is not configured with the server host
public key will be denied of access to the server. To access the server, a user must configure in
advance the server host public key locally and specify the public key name for authentication.
Table 1-15 Follow these steps to enable the device to support first-time authentication:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enable the device to
support first-time
authentication
ssh client first-time enable
Optional
By default, the client is enabled to
run first-time authentication.
Table 1-16 Follow these steps to disable first-time authentication support:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Disable first-time authentication
support
undo ssh client first-time
Required
By default, the client is enabled
to run first-time authentication.
Configure server public key
Required
The method of configuring
server public key on the client is
similar to that of configuring
client public key on the server.
Specify the host key name of
the server
ssh client { server-ip |
server-name } assign
publickey keyname
Required
Establishing the connection between the SSH client and server
The client’s method of establishing an SSH connection to the SSH server varies with authentication
types.
Table 1-17 Follow these steps to establish an SSH connection:
To do...
Use the command...
Remarks
Enter system view
system-view
—