H3C Technologies H3C S3100 Series Switches - Manual (Page 395)

2-3
You can control the usage of ACL resources by setting the ACL timer. The ACL timer starts once a user
gets online. If the user has not passed authentication when the ACL timer expires, the occupied ACL
resources are released for other users to use. When a tremendous of access requests are present, you
can decrease the timeout period of the ACL timer appropriately for higher utilization of ACL resources.
Table 2-2 Configure the ACL timer
To do... Use the command... Remarks
Enter system view system-view —
Set the ACL timer
dot1x timer acl-timeout
acl-timeout-value
Required
By default, the ACL timeout period is
30 minutes.
Displaying and Maintaining Quick EAD Deployment
After performing the above configurations, you can display and verify the quick EAD
deployment-related configuration by executing the display command in any view.
Table 2-3 Display quick EAD deployment
To do... Use the command... Remarks
Display configuration
information about quick EAD
deployment display dot1x [ sessions |
statistics ] [ interface
interface-list ]
This command can be
executed in any view.
Quick EAD Deployment Configuration Examples
Network requirements
A user connects to the switch directly. The switch connects to the Web server and the Internet. The user
will be redirected to the Web server to download the authentication client and upgrade software when
accessing the Internet through IE before passing authentication. After passing authentication, the user
can access the Internet.