Selecting a protocol for remote connection, Selecting an ssh version – H3C Technologies H3C S3100 Series Switches User Manual
Page 729
Advertising
1-16
Figure 1-7 SSH client configuration interface 1
In the Host Name (or IP address) text box, enter the IP address of the server. Note that there must be
a route available between the IP address of the server and the client.
Selecting a protocol for remote connection
As shown in
, select SSH under Protocol.
Selecting an SSH version
From the category on the left pane of the window, select SSH under Connection. The window as
shown in
appears.
Advertising