H3C Technologies H3C MSR 50 - Manual (Page 167)

3-63
Interface attributes
The following table describes the interface attributes of the MIM-6FCM.
Table 3-53 Interface attributes of the MIM-6FCM
Attribute Description
Connector RJ-45
Number of connectors 6
Cable Telephone cable with ferrite core
Supported protocols
ITU-T V.21, V.22, V.22BIS, V.23, V.29
Fast handshake protocol based on ITU-T V.23 and ITU-T
V.29
Bell 212A/103
Interface LEDs
The following figure illustrates the MIM-6FCM panel.
Figure 3-78 MIM-6FCM panel
Each connector of the POS access port has two LEDs: carrier detect (CD) and ACT.
Table 3-54 Description of the LEDs on the MIM-6FCM panel
LED Description
CD
z
OFF means no carrier signals are detected.
z
ON means a carrier signal is detected.
ACT
z
Blinking means data is being received or transmitted.
z OFF means no data is being received or transmitted.
Interface cable
The MIM-6FCM uses telephone cables with ferrite core.
The standard equipment package for the MIM-6FCM includes the appropriate number of interface
cables.
Connecting the interface cable